Free installation + 2-year warranty on every purifier · Installation and service across Mangaluru, Bengaluru and nearby towns · Book a lab test

Iron removers · manual and automatic

Iron removers. Clear water from every tap.

A Puryn iron remover is one FRP tank of MnO2-coated catalytic media fitted between your borewell pump and the overhead tank. It removes dissolved iron and manganese and reduces the rotten-egg smell, with no salt and no cartridges. Two models, both rated at 1,000 litres an hour: manual with a 2-year warranty, and automatic with a 5-year unconditional warranty.

  • Lab report before we recommend
  • Manual: 2-year warranty
  • Automatic: 5-year unconditional warranty
  • Installed by our own technicians
  • No salt, no cartridges
  • 1,000 LPH for the whole house
Watch: the automatic iron remover (30 s)

Not sure which model? Most families pick the automatic: it backwashes on its own and carries the 5-year unconditional warranty. The manual suits homes where someone will turn the handle as advised.

Step 1: Find your problem

Is it iron in your water?

Many borewells carry dissolved iron. You cannot see it when the water first comes out; once it meets air it turns to rust, and the signs show up all over the house.

Yellow or brown water

Clear from the tap, yellow after it stands.

YESRemoves dissolved iron

Orange stains

Tiles, sinks, buckets, white clothes.

YESNo new stains

Rotten-egg smell

Often comes with iron.

YESReduces the smell

Black specks

Usually manganese.

YESRemoves manganese
Orange iron stains in a wash basin from borewell water
Blue-green stains or leaking pipes too?

Your water may also be acidic

Acidic water needs pH correction before the iron remover. The lab report checks pH as well as iron.

Acidic water treatment
How it works

Three steps, one tank.

01

Iron is caught

Borewell water flows down through a bed of MnO2-coated catalytic media, which turns dissolved iron and manganese into particles and holds them until the next wash.

02

Clear water flows on

Filtered water leaves through the centre tube and goes on to every tap in the house.

03

The bed is washed

Every so often the flow reverses and flushes the trapped iron to the drain. On the manual model you turn one handle; the automatic does it on its own.

Step 2: Pick a model

Manual or automatic?

Same tank, same media, same 1,000 LPH. The difference is who cleans the bed, and the warranty.

Puryn manual iron remover with multiport valve
MANUAL · 2-YEAR WARRANTY

Clear water, the simple way.

Turn the valve handle to backwash, then rinse, and the iron goes to the drain. No electricity needed.

Puryn automatic iron remover with digital valve
AUTOMATIC · 5-YEAR UNCONDITIONAL WARRANTY

Set it once. It cleans itself.

A programmable digital valve runs the backwash and rinse on a schedule our technician sets, whether you are home or away.

ManualMOST CHOSENAutomatic
ValveManual multiport valve, top-mountedAutomatic valve, digital display
CleaningTurn the handle: backwash, rinse, filterBackwash and fast rinse on schedule
Pressure vesselFRP, 13 × 54 inchFRP, 13 × 54 inch
Inlet / outlet1.5 inch (40 NB)1 inch (25 NB)
Rated flow1,000 LPH1,000 LPH (1,200 LPH maximum)
Filter mediaMnO2-coated catalytic media, graded silica gravelMnO2-coated catalytic media, graded silica gravel
PowerNot required230 V AC through a low-voltage adaptor
SuitsHomes where someone can backwash as advisedBusy homes, rented houses, homes left empty
Warranty2-year warranty5-year unconditional warranty

iRated flow

1,000 litres an hour covers a house with several taps running at once.

iBackwash

The pump has to push about 40 litres a minute through the tank during the wash. We measure your pump during the test.

iHigh iron

Above about 2 mg/L of iron we fit the automatic model with air injection. See all iron systems.

Iron water from a borewell next to clear water after a Puryn iron remover (illustrative)
BEFOREIron water from the borewell
AFTERTypical result after a Puryn iron remover

Illustrative image. Results depend on your water, which we lab-test before we recommend a unit.

Installation

Installed where the water enters the house

The unit sits between your borewell pump and the overhead tank, so every tap gets treated water. Our technicians fit it with bypass piping, so water keeps flowing while the unit is serviced.

Puryn manual iron remover installed outside a home
Manual unit with bypass piping
Puryn manual iron remover installed with bypass piping
Fitted next to the pump line

What to have ready

  • A drain point near the unitFor the backwash water.
  • A 230 V socket (automatic only)Near the valve, not on a switched circuit.
  • Space on the pump lineAbout one square metre near where the line rises to the tank.

What our technicians do

  1. Test the water and measure your pump flow.
  2. Fit the tank on the pump line with a bypass.
  3. Load the media in layers and run a long first backwash.
  4. Set the schedule (automatic) or show you the handle (manual).
  5. Test the outlet water and register your warranty.

For bathing, washing and cleaning. For drinking water, add a Puryn purifier (e1 to e6).

See e1 to e6
Lab report before and after

Book a lab test.

We test your borewell water for iron and pH, check the pressure and flow, and then recommend manual or automatic. Both lab reports are included in your price.

Mangaluru storePuryn International, First Floor, 10, HNGC Icon Planet, 7th Block, Krishnapura, Surathkal, Mangaluru 575014
Call or WhatsApp+91 90718 01000
WarrantyRegister your unit at puryn.in/warranty
FAQ

Frequently asked questions

Will an iron remover make my water safe to drink?

No. An iron remover treats water for bathing, washing and cleaning. For drinking water, add a Puryn purifier (e1 to e6) on the kitchen line.

Manual or automatic: which should I choose?

The manual model needs no electricity and you backwash it with one handle. The automatic model backwashes itself on a schedule, so it suits busy homes and houses left empty for long periods, and it carries a 5-year unconditional warranty.

How often does the filter need to be washed?

It depends on how much iron your water carries and how much water you use. Our technician sets the schedule after the water test. On the automatic model the valve does it for you.

Do I need salt?

No. Puryn iron removers use catalytic media, not salt. There is nothing to top up.

What if my iron is very high?

Above about 2 mg/L we fit the automatic model with an air injector and air release valve ahead of the tank. Acidic water gets pH correction first.

Is an iron remover the same as a water softener?

No. An iron remover deals with iron, manganese and the rotten-egg smell. A softener deals with hardness, the white scale on taps and geysers. Some borewells need both, and your lab report tells us which.

What does the warranty cover?

The manual iron remover carries a 2-year warranty and the automatic iron remover carries a 5-year unconditional warranty. Register your unit at puryn.in/warranty after installation.

How does the lab test work?

You get two lab reports: a pre-treatment report before we recommend anything and a post-treatment report after installation. Both, worth ₹2,000, are included in the price of your system. You pay ₹1,000 when we take the first sample, and it is adjusted when you order. For example, on a ₹65,000 system you pay the remaining ₹64,000.

Yellow water at home?

Book a lab test. We check your borewell water and recommend the right iron remover.

Droppy, the PURYN water mascot
Ask Droppyabout water
Droppy
PURYN water assistant · replies instantly